New
Anderson Manufacturing Model One 5.56 NATO AR/M4 Carbine
Ships with one - 30 round aluminum magazine (where not prohibited) $414.00 Without Rear Sight + $25.00 shipping to your FFL Dealer

(Add rear sight for $20.00)

NO CREDIT CARD FEES!


ORDERING INFO IS AT THE BOTTOM OF THIS PAGE

Built from Anderson Manufacturing parts and components
Comes with the BST Lifetime Warranty
(If anything goes wrong with your BST built rifle, during the time that you own it, we will replace or repair it at no charge, Guaranteed)





Components
Anderson Manufacturing Made IN USA

AM-15 Forged 7075-T6 Lower Receiver (now marked MULTI CAL)
5.56/.223 Lower Parts Kit
A3 Forged 7075 T6 Upper Receiver
Upper Parts Kit
M16 5.56/.223 Complete Bolt and Carrier Group is chrome lined, made from 8620 steel, Bolt is made from 9310 steel and coated per mil spec. MPI Tested
AR-15 charging handle made from 7075 T6 aluminum forging
A2 Style Flash Hider
304 Stainless Steel Carbine length gas tube
Delta Ring, Weldon Spring and Snap Ring

M4 16" military grade  chrome moly 1:8 bbl with gas block and bbl extension nut
Also available in 20" Heavy Barrel for an additional $35.00



A2 front Sight
A Frame Front Sight Base Gas Block with Bayonet Lug
Carbine Length Double Heat Shield Handguard


UTG
 
Detachable Compact Rear Sight w/Full W/E Adjustment (optional, add $20.00)




Anderson Manufacturing AM-15 lower receiver delivers custom shop quality without the typical custom shop price. Perfect platform for building the ultimate, mission-specific, AR-15 rifle or carbine. Made from a high-strength, 7075 T6 aluminum forging for reliable performance and outstanding durability. Mil-Spec, hard anodized finish adds extra strength to the receiver walls and delivers superior abrasion-resistance for rugged field use. Precision-machined to ensure drop-in installation of Mil-Spec, aftermarket components. Marked MULTI CAL

Anderson’s stripped upper receiver with M4 feed ramps, made of 7075 T6 forging, hard anodized black.







Or add on these quality accessories:

• UTG Pro Made in USA Model 4 Carbine Length Tactical Quad Rails with rubber covers + $55.00




• UTG Tactical Low-Profile Universal Foldable Bipod + $35.00



• Hogue Fiberglass Core Rubber Covered AR Pistol Grip + $20.00




Magpul CTR 6 position locking Butt Stock + $54.00




A few words on ammunition and 16" carbines:

Our 556 NATO Carbines are test fired using PMC 223 Remington 55 grain FMJ-BT Ammunition. They are chambered for 556 but we test them with 223 to insure that the buffer system functions properly with the lower pressure round. We recommend that you use the same or comparable loads to insure proper cycling function and operation of your carbine. We do not recommend the use of any Russian, steel or lacquered cased ammunition with this rifle. Any other case material besides brass will result in chamber fouling and extraction problems.

Russian 556 NATO ammo is notorious for not cycling the action on carbines. We recommend that you do not fire any steel or lacquer cased ammo out of your 556 MIL SPEC chambered upper receivers. Use only brass cased rounds. If you don't know how to tell the difference, steel is usually gray and lacquered is almost always green.

Our Carbines are test fired with magazine they have been shipped with, if ordered. If not we use a MIL SPEC 30 round aluminum magazine. We recommend using this magazine the first time out to insure proper operation, before using any other type of magazines such as Magpul PMags.

Before packing, the bore and chamber are scrubbed and swabbed. The Bolt Carrier Group is given a light coat of CLP inside and out.  Rem Oil is applied to the outside of the barrel. The rear sight, if included, is removed and packed separately due to shipping box constraints. Of course you should inspect the chamber and bore before use but It should function properly right out of the box.

After your first time out to the range, make sure to remove, disassemble and thoroughly clean the BCG. You will want to be sure to remove any carbon deposits from the bolt surface then lightly coat with CLP. This will help to prevent carbon buildup.


Note: Proper shouldering technique when firing 16" carbines is important for cycling. Make sure to keep good, firm pressure between the butt stock and your shoulder when firing. "Soft Shouldering" a carbine will more than likely cause it to "short stroke" and lock the bolt to the rear as it would when the last round has been fired and the magazine is empty.

All builds and components are covered by BST 100% as long as you own your rifle. If anything goes wrong with it we will repair or replace it at our expense - GUARANTEED

Cancellation / Return Policy - If you order a firearm, purchase by credit card and receive an order confirmation number from BST, then for whatever reason, decide to cancel your order before it has shipped, there will be a $35.00 restocking charge and a 6% refund processing service charge assessed against your payment amount before refund.

If your firearm has been delivered to your dealer and is not found to be defective upon receipt, it is considered to be non defective and serviceable. If you decide for any reason, that you would like to return a non defective and serviceable firearm to us for a refund, you have 10 days from the date of delivery to your dealer to do so, insured at your own expense for the purchase amount, plus $35.00 restocking charge as well as  a 6% refund processing service charge. After ten days we will not accept return of non defective and serviceable firearms for a refund.



If Black Star Tactical is not able to deliver your order for any reason, to include unforeseen ATF regulation changes implemented before your order has shipped,  we will refund your payment in full at no penalty.



IF YOU HAVE ATTEMPTED TO PURCHASE THIS RIFLE ON GunsAmerica PLEASE NOTE!
We do not handle any payment transactions through that site. The "Backup Buyer" and other functions do not work for purchasing our firearms.

TO ORDER THIS RIFLE
Call or email us at sales@black-star-tactical.com with your receiving dealer's zip code and your contact information. Let us know what you would like to order including any add on accessories. We will send you an itemized order confirmation including your order number, build specifications and actual shipping cost delivered to your FFL Dealer.
You can then contact us by phone with your credit card payment info to place your order.
 

Black Star Tactical

812-744-5283

You can call us 11am -10pm  EST to place an order and provide payment information. If you do not reach a live person, please leave your name and call back info and we will get back to you right away.


After your payment has cleared, we will complete your order. Lead time is presently running around 3 weeks. You can contact your dealer after you have received your order number and have them email a scanned copy of their FFL to us at sales@black-star-tactical.com or snail mail to the above address. Please have them include your name along with your order number as reference so that we can match up their ship to information with your order



Email Us at sales@black-star-tactical.com


BACK  HOME